API 5L X100 LSAW Pipe

API 5L X100 LSAW Pipe are utilized for a variety of applications in different industries. They are used in petroleum, shipbuilding, piling, mechanical processing, construction, thermoelectricity, refineries, drilling, and others where pipes and tubes are needed for operations. The API 5L X100 LSAW Pipe are very strong and can withstand high temperature and pressure without any difficulty which makes them suitable for usage in a wide range of commercial applications. They are also corrosion proof which lends them high utility value in industries that transmit chemicals during the operations.

Be it drilling in harsh environment or extraction from tough surfaces, the API 5L X100 LSAW Pipe fit the bill and have got it in themselves to complete the task. These pipes carry high value for the aforementioned industries as well as other sectors where pipes and tubes are an integral part of business operations. The sturdy pipes are known for their signature strength and the way they have been proving their worth, they have become a sought-after piping choice for businesses. So, if a business is looking to find high-quality API 5L X100 LSAW Pipe in different dimensions then Rexal Tubes brings forth the most varied collection that will surely go with the unique needs of any business.

Applicable codes and standards
 API 5L, 45th Edition / ISO 3183 
Specification for line pipe – technical delivery conditions. 

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

Notes:

1. 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum. For grades up to and including X52, Cu, Cr, and Ni shall not be added intentionally.
2. For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese in permissible, up to a maximum of 1.65% for grades ≥ B, but ≤ X52; up to a maximum of 1.75% for grades > X52, but
3. Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
4. The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
5. Unless otherwise agreed.
6. Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15
7. Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
8. The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
9. Unless otherwise agreed.
10. Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%

Click here for API 5L X100 LSAW Pipe in Singapore

Other details

Surface

1. All surfaces have been 100% visually inspected. The surface condition complies with API 5L standards.
2. External surface of pipe shall be coated with a layer of varnish.

NDT

All pipes will be ultrasonic tested on pipe body and pipe end as per API 5L standards:

1. longitudinal: 100% of the pipe surface
2. pipe ends not scanned by automatic ultrasonic system shall be inspected by manual UT or Magnetic Particle Examination.

Certification and traceability

All dimensions will be supplied with a 3.2 certificate according to EN 10204, endorsed by recognized and independent inspection agency. Marking shall be in SI units (X42) accordance with API requirements & mill standard.

Dimensional control

All dimensions will be supplied according to API 5L clause 9.11; In addition, the following tolerances apply:

1. Pipe body: +/- 0,75%
2. Pipe end: +/- 0,5%
3. Wall thickness: +15%, -12,5%
4. Length: -0 / +100mm

Pipe Ends

Pipe Ends are bevelled. End angle shall be 30°- 0°/+5°, root face shall be 1.6mm +/- 0.8mm and fitted with bevel protectors.

Protection

Pipes are varnished on the outside.

Read More About API Pipes