ISO 3183 Pipe Supplier

ISO 3183 Pipe

ISO 3183 Pipe

ISO 3183 Pipe

The growing importance of ISO 3183 Pipe in different industries cannot be overemphasized. The ISO 3183 Pipe has become a prized material due to its numerous favorable qualities and this is why there is a growing demand for steel products like ISO 3183 Pipe. Businesses involved in petroleum, natural gas, water, construction, infrastructure development and many other sectors make use of ISO 3183 Pipe for various purposes and the pipes have been gaining commercial importance across industries. Businesses look for good quality pipes for their different commercial operations and the good news is that ISO 3183 Pipe are available in different dimensions for industrial usage. They have proved their worth in a commendable manner and so has Rexal Tubes, a pioneering and credible name in the field of tubes and pipes.

Rexal Tubes has been manufacturing and supplying ISO 3183 Pipes of various forms to various industries and these include not just the ones that have been mentioned above. They cover many more. So, what exactly are the characteristics that have made ISO 3183 Pipe a rock star? Well, steel, as an alloy, possesses many mechanical properties. Its strength increases and so does its resistance to chemicals. It also acquires flexibility, sturdiness, and shine. Unlike iron, it does not corrode and enjoys a longer shelf life. The look also gets an upgrade, thereby, adding to its aesthetical value.

ISO 3183 Pipe PRODUCTS

ISO 3183 LSAW Pipes

ISO 3183 Seamless Pipes

ISO 3183 Welded Pipes

RELATED PRODUCTS

Carbon Steel Seamless Pipes
Alloy Steel Pipes

Nickel Pipes and Tubes

ISO 3183 LSAW Pipe

ISO 3183 LSAW Pipe
ISO 3183 Seamless Pipe
ISO 3183 Welded Pipe

Know more

ISO 3183 Seamless Pipe

ISO 3183 LSAW Pipe
ISO 3183 Seamless Pipe
ISO 3183 Welded Pipe

Know more

ISO 3183 Welded Pipe

ISO 3183 LSAW Pipe
ISO 3183 Seamless Pipe
ISO 3183 Welded Pipe

Know more

Why purchase ISO 3183 Pipe from Rexal Tubes?

Rexal Tubes boasts of a long and impressive journey in the field of ISO 3183 Pipe production. The company has been manufacturing and supplying ISO 3183 Pipes for fifteen years to consumers spread across the globe. The national and international customers have reposed their faith time and again in the company as the products have lived up to their piping requirements. They have served different purposes like transmission of oil and gas, water treatment, drilling, structural equipment, etc. All this has been made possible because of the first-rate quality of ISO 3183 Pipe that are manufactured with the best machines and methods.

At Rexal Tubes, the most up-to-date manufacturing procedure is followed in an equally modern factory with the help of cutting-edge tools that always lead to fine quality modern ISO 3183 Pipe. The technicians follow the quality control measures strictly and the production procedures are always in tune with the latest grading of international and national bodies. Last but not the least, there is full scope for customization and the customer can always rely on the after sale services for their unique pipe/tube requirements. Rexal Tubes supplies pipes in different shapes, sizes, lengths, widths, diameters, thickness, grades, designs and numerous other specifications. The choices are endless and completely equipped to cater to the diverse demands.

ISO 3183 Pipe Applications

ISO 3183 Pipes are used in multiple fields and they include heat exchangers, fertilizers, power, paper, pulp, pharmaceuticals, sugar, food processing, dairy and many more. However, they are primarily used in transportation of petroleum, natural gas and water. All these industries put the ISO 3183 Pipe to various uses and they serve different purposes in accordance with the operations requirement. The ISO 3183 Pipes are fit for bending, fusion welding and flanging. They are totally customizable and this is why, the ISO 3183 Pipes come with such a wide scope of application. Strong and durable, the ISO 3183 Pipe are applied in high-pressure work conditions and it is their quality through which they stand the high temperature and pressure, fulfilling the operational demands of the businesses. The ISO 3183 Pipes are designed to deliver and are already tested for performance. So, no matter what the industrial application, one can rest assured that the pipes will perform to perfection and give the results that they are expected to give.

Under this specification, the grades covered are A25, A, B. The following “X” grades are also covered: X42, X46, X52, X56, X60, X65, X70, X80. The two digits following “X” signify the Minimum Yield Strength of the pipe that has been produced in this grade.

We, at Rexal Tubes, stock the complete range of pipes in both PSL1 and PSL2 in seamless.

The example of ISO 3183 Pipe is mentioned below:

Size: ¼” to 36″
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

Standard: ISO 5L
Product Specification Level: PSL 1
Steel Grade: X42

CHEMICAL COMPOSITION
C	Si	MN	P	S	V	Nb	Ti	Other	Carbon Equivalent
Max (b)	Max	Max (b)	Max	Max	Max	Max	Max		% maximum
									CE(IIW)	CE(Pcm)
0.26	–	1.30/	0.030/	0.030/	(d)	(d)	(d)	(a)	–	–

MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes				Ratio	Elongation	CVN Absorbed Energy		Heat Treatment
Yield Strength (R10.5)		Tensile Strength (R)		R 10.5/ R	%	0 degree celsius
PSI	Mpa	PSI	Mpa	Max	Minimum	Min J	Min ft. lb	Wield Seam Normalizing

42,100 min	290 min	60,200 min	415 min	–		–	–

IMPACT TEST
AVG ABSORBED ENERGY			IND. ABSORBED ENERGY
MIN (JOULES)			MIN (JOULES)
27			20

Notes:

0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum. For grades up to and including X52, Cu, Cr and Ni shall not be added intentionally.
For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese in permissible, up to a maximum of 1.65% for grades ≥ B, but ≤ X52; up to a maximum of 1.75% for grades > X52, but (c) Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
Unless otherwise agreed.
Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
Unless otherwise agreed, 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum.
Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
Unless otherwise agreed, 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum.

Other details:

Surface
1. All surfaces have been 100% visually inspected. The surface condition complies with API 5L standards.
2. External surface of pipe shall be coated with a layer of varnish.

NDT
All pipes will be ultrasonic tested on pipe body and pipe end as per API 5L standards:
1. longitudinal: 100% of the pipe surface
2. pipe ends not scanned by automatic ultrasonic system shall be inspected by manual UT or Magnetic Particle Examination.

Certification and traceability
All dimensions will be supplied with a 3.2 certificate according to EN 10204, endorsed by recognized and independent inspection agency. Marking shall be in SI units (X52) accordance with API requirements & mill standard.

Dimensional control
All dimensions will be supplied according to API 5L clause 9.11; In addition, the following tolerances apply:
1. Pipe body: +/- 0,75%
2. Pipe end: +/- 0,5%
3. Wall thickness: +15%, -12,5%
4. Length: -0 / +100mm

Pipe Ends

Pipe Ends are bevelled. End angle shall be 30°- 0°/+5°, root face shall be 1.6mm +/- 0.8mm and fitted with bevel protectors.

Protection

Pipes are varnished on the outside.

Enquiry Form