API 5L Seamless Pipes in Kuwait

API 5L Seamless Pipes supplier in Kuwait

API 5L Seamless Pipes in Kuwait

API 5L Seamless pipes in Kuwait

In the pipes and tubes industry, API 5L pipes are considered to be the gold standard of quality. The American Petroleum Institute aka API has defined guidelines for the production of steel line pipes. The specifications for API 5L pipes further comply with the standards of International Organization for Standardization ISO 3183, which is the apex body responsible for standardizing pipeline transportation systems in the equipment, materials, and offshore structures for petrochemical, petroleum, and natural gas industries. The body has set up benchmarks to which the API 5L pipes adhere and this is why, when companies have to order pipes/tubes for their business operations, they look up to API 5L Seamless Pipes.

API 5L pipes are available as seamless as well as welded pipes. API 5L Seamless Pipes, as the name suggests, is a pipe without a seam or weld-joint. It does not have any joint in its cross-section throughout its length. These API 5L Seamless Pipes are stronger in comparison to the welded pipes because the weld-joint section of the pipe is the weaker spot of the pipe which limits its strength. This is why companies looking for strong and high-resistance pipes go for seamless pipes to power their production units. Businesses operating in oil, gas, and water transmission bank on seamless pipes for a wide range of applications and Rexal Tubes offers an equally wide range of seamless pipes. To get more details, Download API 5L Seamless Pipes.

API 5L PIPES PRODUCTS

API 5L PSL1 Pipes

API 5L PSL2 Pipes

API 5L Seamless Pipes

API 5L LSAW Pipes

API 5L DSAW Pipes

API 5L HIC TESTED Pipe

API 5L SSC TESTED Pipe

API 5L NACE MR0175 Pipe

API 5L 3.2 Certified Pipe

RELATED PRODUCTS

Nickel Pipes and Tubes
ISO 3183 Pipe

API 5L X42 PSL1 Seamless Pipe in Kuwait

Applicable codes and standards  API 5L, 45th Edition / ISO 3183  Specification for line pipe – technical delivery conditions.

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

CHEMICAL COMPOSITION
C	Si	MN	P	S	V	Nb	Ti	Other	Carbon Equivalent
Max (b)	Max	Max (b)	Max	Max	Max	Max	Max		% maximum
									CE(IIW)	CE(Pcm)
0.26	–	1.30	0.030	0.030	(d)	(d)	(d)	(a)	–	–

MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes				Ratio	Elongation	CVN Absorbed Energy		Heat Treatment
Yield Strength (R10.5)		Tensile Strength (R)		R 10.5/ R	%	0 degree celsius		Heat Treatment
PSI	Mpa	PSI	Mpa	Max	Minimum	Min J	Min ft. lb	Wield Seam Normalizing

42,100 min	290 min	60,200 min	415 min	–		–	–

IMPACT TEST
AVG ABSORBED ENERGY	IND. ABSORBED ENERGY
MIN (JOULES)	MIN (JOULES)
27	20

API 5L GR.B PSL1 SEAMLESS PIPE in Kuwait

Applicable codes and standards  API 5L, 45th Edition / ISO 3183  Specification for line pipe – technical delivery conditions.

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

CHEMICAL COMPOSITION
C	Si	MN	P	S	V	Nb	Ti	Other	Carbon Equivalent
Max (b)	Max	Max (b)	Max	Max	Max	Max	Max		% maximum
									CE(IIW)	CE(Pcm)
0.26	–	1.20	0.030	0.030	(c), (d)	(c), (d)	(d)	(a)	–	–

MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes				Ratio	Elongation	CVN Absorbed Energy		Heat Treatment
Yield Strength (R10.5)		Tensile Strength (R)		R 10.5/ R	%	0 degree celsius		Heat Treatment
PSI	Mpa	PSI	Mpa	Max	Minimum	Min J	Min ft. lb	Wield Seam Normalizing

35,500 min	245 min	60,200 min	415 min	–		–	–

IMPACT TEST
AVG ABSORBED ENERGY	IND. ABSORBED ENERGY
MIN (JOULES)	MIN (JOULES)
27	20

API 5L Gr.B PSL2 Seamless Pipe in Kuwait

Applicable codes and standards  API 5L, 45th Edition / ISO 3183  Specification for line pipe – technical delivery conditions.

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

API 5L Grade B PSL2 Specification

API 5L Grade b Chemical Composition
C	Si	MN	P	S	V	Nb	Ti	Other	Carbon Equivalent
Max (b)	Max	Max (b)	Max	Max	Max	Max	Max		% maximum
									CE(IIW)	CE(Pcm)
0.22	0.45	1.20	0.025	0.015	0.05	0.05	0.04	(g)	0.043	0.25

MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes				Ratio	Elongation	CVN Absorbed Energy		Heat Treatment
Yield Strength (R10.5)		Tensile Strength (R)		R 10.5/ R	%	0 degree celsius		Heat Treatment
PSI	Mpa	PSI	Mpa	Max	Minimum	Min J	Min ft. lb	Wield Seam Normalizing

35,500-65300 min	245-450 min	60,200-110200min	415-760 min	–		–	–

IMPACT TEST
AVG ABSORBED ENERGY	IND. ABSORBED ENERGY
MIN (JOULES)	MIN (JOULES)
27	20

API 5L X46 PSL2 Seamless Pipe in Kuwait

Applicable codes and standards  API 5L, 45th Edition / ISO 3183  Specification for line pipe – technical delivery conditions.

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

CHEMICAL COMPOSITION
C	Si	MN	P	S	V	Nb	Ti	Other	Carbon Equivalent
Max (b)	Max	Max (b)	Max	Max	Max	Max	Max		% maximum
									CE(IIW)	CE(Pcm)
0.26	–	1.40/	0.030	0.030	(d)	(d)	(d)	(a)	–	–

MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes				Ratio	Elongation	CVN Absorbed Energy		Heat Treatment
Yield Strength (R10.5)		Tensile Strength (R)		R 10.5/ R	%	0 degree celsius		Heat Treatment
PSI	Mpa	PSI	Mpa	Max	Minimum	Min J	Min ft. lb	Wield Seam Normalizing

46,400 min	320 min	63,100 min	435 min	–		–	–

IMPACT TEST
AVG ABSORBED ENERGY	IND. ABSORBED ENERGY
MIN (JOULES)	MIN (JOULES)
27	20

API 5L X42 PSL2 Seamless Pipe in Kuwait

Applicable codes and standards  API 5L, 45th Edition / ISO 3183  Specification for line pipe – technical delivery conditions.

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

API 5Lx42 Specification

CHEMICAL COMPOSITION
C	Si	MN	P	S	V	Nb	Ti	Other	Carbon Equivalent
Max (b)	Max	Max (b)	Max	Max	Max	Max	Max		% maximum
									CE(IIW)	CE(Pcm)
0.22	0.45	1.30	0.025	0.015	0.05	0.05	0.04	(g)	–	–

MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes				Ratio	Elongation	CVN Absorbed Energy		Heat Treatment
Yield Strength (R10.5)		Tensile Strength (R)		R 10.5/ R	%	0 degree celsius		Heat Treatment
PSI	Mpa	PSI	Mpa	Max	Minimum	Min J	Min ft. lb	Wield Seam Normalizing

42100-71800 min	290-495 min	60,200-110200 min	415-750 min	–		–	–

IMPACT TEST
AVG ABSORBED ENERGY	IND. ABSORBED ENERGY
MIN (JOULES)	MIN (JOULES)
27	20

API 5L X46 PSL1 SEAMLESS SPECIFICATION in Kuwait

Applicable codes and standards  API 5L, 45th Edition / ISO 3183  Specification for line pipe – technical delivery conditions.

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

CHEMICAL COMPOSITION
C	Si	MN	P	S	V	Nb	Ti	Other	Carbon Equivalent
Max (b)	Max	Max (b)	Max	Max	Max	Max	Max		% maximum
									CE(IIW)	CE(Pcm)
0.26	–	1.40	0.025	0.015	0.05	0.05	0.04	(g)	0.43	0.25

MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes				Ratio	Elongation	CVN Absorbed Energy		Heat Treatment
Yield Strength (R10.5)		Tensile Strength (R)		R 10.5/ R	%	0 degree celsius		Heat Treatment
PSI	Mpa	PSI	Mpa	Max	Minimum	Min J	Min ft. lb	Wield Seam Normalizing

46400 min	320 min	63100 min	435 min	–		–	–

IMPACT TEST
AVG ABSORBED ENERGY	IND. ABSORBED ENERGY
MIN (JOULES)	MIN (JOULES)
27	20

API 5L X56 PSL1 Seamless Pipes in Kuwait

Applicable codes and standards  API 5L, 45th Edition / ISO 3183  Specification for line pipe – technical delivery conditions.

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

CHEMICAL COMPOSITION
C	Si	MN	P	S	V	Nb	Ti	Other	Carbon Equivalent
Max (b)	Max	Max (b)	Max	Max	Max	Max	Max		% maximum
									CE(IIW)	CE(Pcm)
0.26	–	1.40	0.030	0.030	(d)	(d)	(d)	(a)	–	–

MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes				Ratio	Elongation	CVN Absorbed Energy		Heat Treatment
Yield Strength (R10.5)		Tensile Strength (R)		R 10.5/ R	%	0 degree celsius		Heat Treatment
PSI	Mpa	PSI	Mpa	Max	Minimum	Min J	Min ft. lb	Wield Seam Normalizing

56,600 min	390 min	71,100 min	490 min	–		–	–

IMPACT TEST
AVG ABSORBED ENERGY	IND. ABSORBED ENERGY
MIN (JOULES)	MIN (JOULES)
27	20

API 5L X52 PSL1 Seamless Pipe in Kuwait

Applicable codes and standards  API 5L, 45th Edition / ISO 3183  Specification for line pipe – technical delivery conditions.

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all the products.

CHEMICAL COMPOSITION
C	Si	MN	P	S	V	Nb	Ti	Other	Carbon Equivalent
Max (b)	Max	Max (b)	Max	Max	Max	Max	Max		% maximum
									CE(IIW)	CE(Pcm)
0.26	–	1.40/	0.030/	0.030/	(d)	(d)	(d)	(a)	–	–

MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes				Ratio	Elongation	CVN Absorbed Energy		Heat Treatment
Yield Strength (R10.5)		Tensile Strength (R)		R 10.5/ R	%	0 degree celsius		Heat Treatment
PSI	Mpa	PSI	Mpa	Max	Minimum	Min J	Min ft. lb	Wield Seam & HAZ Normalizing

52,200 min	360 min	66,700 min	460 min	–		–	–

IMPACT TEST
AVG ABSORBED ENERGY	IND. ABSORBED ENERGY
MIN (JOULES)	MIN (JOULES)
27	20

API 5L X60 PSL2 Seamless Pipe in Kuwait

Applicable codes and standards  API 5L, 45th Edition / ISO 3183  Specification for line pipe – technical delivery conditions.

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

API 5Lx60 CHEMICAL COMPOSITION
C	Si	MN	P	S	V	Nb	Ti	Other	Carbon Equivalent
Max (b)	Max	Max (b)	Max	Max	Max	Max	Max		% maximum
									CE(IIW)	CE(Pcm)
0.12 (e)	0.45 (e)	1.60 (e)	0.025	0.015	(h)	(h)	(h)	(i)	0.43	0.25

MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes				Ratio	Elongation	CVN Absorbed Energy		Heat Treatment
Yield Strength (R10.5)		Tensile Strength (R)		R 10.5/ R	%	0 degree celsius		Heat Treatment
PSI	Mpa	PSI	Mpa	Max	Minimum	Min J	Min ft. lb	Wield Seam & HAZ Normalizing

60,200-81,900	415-565	75,400-110,200	520-760	0.93		27	20

IMPACT TEST
AVG ABSORBED ENERGY	IND. ABSORBED ENERGY
MIN (JOULES)	MIN (JOULES)
27	20

API 5L X56 PSL2 Seamless pipe in Kuwait

Applicable codes and standards  API 5L, 45th Edition / ISO 3183  Specification for line pipe – technical delivery conditions.

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

CHEMICAL COMPOSITION
C	Si	MN	P	S	V	Nb	Ti	Other	Carbon Equivalent
Max (b)	Max	Max (b)	Max	Max	Max	Max	Max		% maximum
									CE(IIW)	CE(Pcm)
0.22	0.45	1.40/	0.025	0.015	(d)	(d)	(d)	(g)	0.43	0.25

MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes				Ratio	Elongation	CVN Absorbed Energy		Heat Treatment
Yield Strength (R10.5)		Tensile Strength (R)		R 10.5/ R	%	0 degree celsius		Heat Treatment
PSI	Mpa	PSI	Mpa	Max	Minimum	Min J	Min ft. lb	Wield Seam & HAZ Normalizing

56,600-79,000	390-545	71,100-110,200	490-760	0.93		–	–

IMPACT TEST
AVG ABSORBED ENERGY	IND. ABSORBED ENERGY
MIN (JOULES)	MIN (JOULES)
27	20

API 5L X60 PSL1 Seamless Pipe in Kuwait

Applicable codes and standards  API 5L, 45th Edition / ISO 3183  Specification for line pipe – technical delivery conditions.

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

CHEMICAL COMPOSITION
C	Si	MN	P	S	V	Nb	Ti	Other	Carbon Equivalent
Max (b)	Max	Max (b)	Max	Max	Max	Max	Max		% maximum
									CE(IIW)	CE(Pcm)
0.26 (e)	–	1.40 (e)	0.030	0.030	(f)	(f)	(f)	(a)	–	–

MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes				Ratio	Elongation	CVN Absorbed Energy		Heat Treatment
Yield Strength (R10.5)		Tensile Strength (R)		R 10.5/ R	%	0 degree celsius		Heat Treatment
PSI	Mpa	PSI	Mpa	Max	Minimum	Min J	Min ft. lb	Wield Seam Normalizing

60,200 min	415 min	75,400 min	520 min	–		–	–

IMPACT TEST
AVG ABSORBED ENERGY	IND. ABSORBED ENERGY
MIN (JOULES)	MIN (JOULES)
27	20

API 5L X70 PSL1 Seamless pipe in Kuwait

Applicable codes and standards  API 5L, 45th Edition / ISO 3183  Specification for line pipe – technical delivery conditions.

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

CHEMICAL COMPOSITION
C	Si	MN	P	S	V	Nb	Ti	Other	Carbon Equivalent
Max (b)	Max	Max (b)	Max	Max	Max	Max	Max		% maximum
									CE(IIW)	CE(Pcm)
0.26 (e)	–	1.65 (e)	0.030/	0.030/	(f)	(f)	(f)	(a)	–	–

MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes				Ratio	Elongation	CVN Absorbed Energy		Heat Treatment
Yield Strength (R10.5)		Tensile Strength (R)		R 10.5/ R	%	0 degree celsius		Heat Treatment
PSI	Mpa	PSI	Mpa	Max	Minimum	Min J	Min ft. lb	Wield Seam Normalizing

70,300 min	485 min	82,700 min	570 min	–		–	–

IMPACT TEST
AVG ABSORBED ENERGY	IND. ABSORBED ENERGY
MIN (JOULES)	MIN (JOULES)
27	20

API 5L X65 PSL1 Seamless Pipe in Kuwait

Applicable codes and standards  API 5L, 45th Edition / ISO 3183  Specification for line pipe – technical delivery conditions.

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

CHEMICAL COMPOSITION
C	Si	MN	P	S	V	Nb	Ti	Other	Carbon Equivalent
Max (b)	Max	Max (b)	Max	Max	Max	Max	Max		% maximum
									CE(IIW)	CE(Pcm)
0.26 (e)	–	1.45 (e)	0.030	0.030	(f)	(f)	(f)	(a)	–	–

MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes				Ratio	Elongation	CVN Absorbed Energy		Heat Treatment
Yield Strength (R10.5)		Tensile Strength (R)		R 10.5/ R	%	0 degree celsius		Heat Treatment
PSI	Mpa	PSI	Mpa	Max	Minimum	Min J	Min ft. lb	Wield Seam Normalizing

65,300 min	450 min	77,600 min	535 min	–		–	–

IMPACT TEST
AVG ABSORBED ENERGY	IND. ABSORBED ENERGY
MIN (JOULES)	MIN (JOULES)
27	20

API 5L X65 PSL2 Seamless Pipe in Kuwait

Applicable codes and standards  API 5L, 45th Edition / ISO 3183  Specification for line pipe – technical delivery conditions.

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

API 5l x65 Specification

CHEMICAL COMPOSITION
C	Si	MN	P	S	V	Nb	Ti	Other	Carbon Equivalent
Max (b)	Max	Max (b)	Max	Max	Max	Max	Max		% maximum
									CE(IIW)	CE(Pcm)
0.12 (e)	0.45 (e)	1.60 (e)	0.025	0.015	(h)	(h)	(h)	(i)	0.43	0.25

MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes				Ratio	Elongation	CVN Absorbed Energy		Heat Treatment
Yield Strength (R10.5)		Tensile Strength (R)		R 10.5/ R	%	0 degree celsius		Heat Treatment
PSI	Mpa	PSI	Mpa	Max	Minimum	Min J	Min ft. lb	Wield Seam & HAZ Normalizing

65,300-87,000	450-600	77,600-110,200	535-760	0.93		27	20

IMPACT TEST
AVG ABSORBED ENERGY	IND. ABSORBED ENERGY
MIN (JOULES)	MIN (JOULES)
27	20

API 5L X120 Seamless Pipe in Kuwait

Applicable codes and standards  API 5L, 45th Edition / ISO 3183  Specification for line pipe – technical delivery conditions.

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

CHEMICAL COMPOSITION
Grade	C	Mn	P	S	Si	Nb+Ti	Ni+Cr+Cu	Cr+Mn+Mo
X120	0.06	1.9	0.004	0.004	0.25	≤0.08	≤1.5	≤3

MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes				Ratio	Elongation	CVN Absorbed Energy		Heat Treatment
Yield Strength (R10.5)		Tensile Strength (R)		R 10.5/ R	%	0 degree celsius		Heat Treatment
PSI	Mpa	PSI	Mpa	Max	Minimum	Min J	Min ft. lb	Wield Seam & HAZ Normalizing
120,350-152,350	830-1050	132,675-166,025	915-1145	0.93		27	20

IMPACT TEST
AVG ABSORBED ENERGY	IND. ABSORBED ENERGY
MIN (JOULES)	MIN (JOULES)
27	20

API 5L X70 PSL2 Seamless Pipe in Kuwait

Applicable codes and standards  API 5L, 45th Edition / ISO 3183  Specification for line pipe – technical delivery conditions.

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

API 5Lx70 PSL2 Specification

API 5LX70 CHEMICAL COMPOSITION
C	Si	MN	P	S	V	Nb	Ti	Other	Carbon Equivalent
Max (b)	Max	Max (b)	Max	Max	Max	Max	Max		% maximum
									CE(IIW)	CE(Pcm)
0.12 (e)	0.45 (e)	1.70 (e)	0.025	0.015	(h)	(h)	(h)	(i)	0.43	0.25

MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes				Ratio	Elongation	CVN Absorbed Energy		Heat Treatment
Yield Strength (R10.5)		Tensile Strength (R)		R 10.5/ R	%	0 degree celsius		Heat Treatment
PSI	Mpa	PSI	Mpa	Max	Minimum	Min J	Min ft. lb	Wield Seam & HAZ Normalizing

70,300-92,100	485-635	82,700-110,200	570-760	0.93		27	20

IMPACT TEST
AVG ABSORBED ENERGY	IND. ABSORBED ENERGY
MIN (JOULES)	MIN (JOULES)
27	20

API 5L X100 Seamless Pipe in Kuwait

Applicable codes and standards  API 5L, 45th Edition / ISO 3183  Specification for line pipe – technical delivery conditions.

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

CHEMICAL COMPOSITION
C	Si	MN	P	S	V	Nb	Ti	Other	Carbon Equivalent
Max (b)	Max	Max (b)	Max	Max	Max	Max	Max		% maximum
									CE(IIW)	CE(Pcm)
0.12 (e)	0.45 (e)	1.70 (e)	0.025	0.015	(h)	(h)	(h)	(i)	0.43	0.25

MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes				Ratio	Elongation	CVN Absorbed Energy		Heat Treatment
Yield Strength (R10.5)		Tensile Strength (R)		R 10.5/ R	%	0 degree celsius		Heat Treatment
PSI	Mpa	PSI	Mpa	Max	Minimum	Min J	Min ft. lb	Wield Seam & HAZ Normalizing

100,500-121,800	690-840	110,200-143,550	760-990	0.93		27	20

IMPACT TEST
AVG ABSORBED ENERGY	IND. ABSORBED ENERGY
MIN (JOULES)	MIN (JOULES)
27	20

Why purchase from Rexal Tubes?

Rexal Tubes is the leading manufacturer of pipes, tubes, fittings, and flanges. It has been operating in this domain for fifteen years and if one focuses on API 5L PSL1 Pipes, one can say that the company has the best of stocks and supplies. The variety is as diverse as it can get and one can select from a wide range of diameters, wall thickness, length, width, coating and various other dimensions. All these PSL1 pipes are manufactured using the most upgraded technology and the best of machinery. Our labs are completely in tune with the latest developments and always working with an innovative bent of mind.

Our technicians are skilled and ensure quality at every stage of manufacturing. The testing is also done in a foolproof manner so that the pipes come out with precise specifications. We also take responsibility for delivering the orders at the doorsteps of the customers without any delay or damage. Our huge stocks are always ready to meet any demands, be it regular, urgent or complex. We also offer customized offers to our clients and anyone looking for API 5L PSL1 Pipes can be sure of finding an ideal fit at Rexal Tubes. Cost-effective, competent and efficient, the pipes are tailor-made for the customers.

API 5L PSL1 Pipes Applications

API 5L PSL1 Pipes are used in oil, gas, petroleum and other industries for the transmission of oil, gas, and water. These pipes are strong and possess high resistance which makes them fit to be used in tough climatic conditions. They can withstand corrosive and non-corrosive environment as well. The steel pipes are corrosion proof and hence, suitable for such operations. They can also be put to use in other industries like water treatment, desalination, dairy, breweries, power plants, construction, ship building, etc.

The scope of commercial applications is quite varied as the API 5L PSL1 Pipes are generic in nature and since Rexal Tubes is all about customization, a customer gets a suitable deal without any trouble. The pipes are modified as per the special requirements of the customers and this is done keeping in mind the API standards and guidelines. At no point does quality take a backseat and therefore, one need not worry while ordering from Rexal Tubes. It is sure to fulfill the expectations of the customers.

Applicable codes and standards  API 5L, 45th Edition / ISO 3183  Specification for line pipe – technical delivery conditions.

Size: ¼” to 36”
Wall Thickness: SCH 10 to 160, STD, XS, XXS
Length: up to 12 Meters

*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.

CHEMICAL COMPOSITION
C	Si	MN	P	S	V	Nb	Ti	Other	Carbon Equivalent
Max (b)	Max	Max (b)	Max	Max	Max	Max	Max		% maximum
									CE(IIW)	CE(Pcm)
0.26	–	1.30	0.030	0.030	(d)	(d)	(d)	(a)	–	–

MECHANICAL REQUIREMENT
Tensile Requirements on Pipe body of welded pipes				Ratio	Elongation	CVN Absorbed Energy		Heat Treatment
Yield Strength (R10.5)		Tensile Strength (R)		R 10.5/ R	%	0 degree celsius		Heat Treatment
PSI	Mpa	PSI	Mpa	Max	Minimum	Min J	Min ft. lb	Wield Seam Normalizing

42,100 min	290 min	60,200 min	415 min	–		–	–

IMPACT TEST
AVG ABSORBED ENERGY	IND. ABSORBED ENERGY
MIN (JOULES)	MIN (JOULES)
27	20

Notes:

0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum. For grades up to and including X52, Cu, Cr, and Ni shall not be added intentionally.
For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese in permissible, up to a maximum of 1.65% for grades ≥ B, but ≤ X52; up to a maximum of 1.75% for grades > X52, but
Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
Unless otherwise agreed.
Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15
Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
Unless otherwise agreed.
Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%

Other details

Surface

All surfaces have been 100% visually inspected. The surface condition complies with API 5L standards.
External surface of pipe shall be coated with a layer of varnish.

NDT

All pipes will be ultrasonic tested on pipe body and pipe end as per API 5L standards:

longitudinal: 100% of the pipe surface
pipe ends not scanned by automatic ultrasonic system shall be inspected by manual UT or Magnetic Particle Examination.

Certification and traceability

All dimensions will be supplied with a 3.2 certificate according to EN 10204, endorsed by recognized and independent inspection agency. Marking shall be in SI units (X42) accordance with API requirements & mill standard.

Dimensional control

All dimensions will be supplied according to API 5L clause 9.11; In addition, the following tolerances apply:

Pipe body: +/- 0,75%
Pipe end: +/- 0,5%
Wall thickness: +15%, -12,5%
Length: -0 / +100mm

Pipe Ends

Pipe Ends are bevelled. End angle shall be 30°- 0°/+5°, root face shall be 1.6mm +/- 0.8mm and fitted with bevel protectors.

Protection

Pipes are varnished on the outside.

API 5L Seamless Pipes supplier in Kuwait