ISO 3183 GR.L485 Welded Pipe
ISO 3183 GR.L485 Welded Pipe
The growing importance of ISO 3183 GR.L485 Welded Pipe in different industries cannot be overemphasized. The ISO 3183 GR.L485 Welded Pipe has become a prized material due to its numerous favorable qualities and this is why there is a growing demand for steel products like ISO 3183 GR.L485 Welded Pipe. Businesses involved in petroleum, natural gas, water, construction, infrastructure development and many other sectors make use of ISO 3183 GR.L485 Welded Pipe for various purposes and the pipes have been gaining commercial importance across industries. Businesses look for good quality pipes for their different commercial operations and the good news is that ISO 3183 GR.L485 Welded Pipe are available in different dimensions for industrial usage. They have proved their worth in a commendable manner and so has Rexal Tubes, a pioneering and credible name in the field of tubes and pipes.
Rexal Tubes has been manufacturing and supplying ISO 3183 GR.L485 Welded Pipe of various forms to various industries and these include not just the ones that have been mentioned above. They cover many more. So, what exactly are the characteristics that have made ISO 3183 GR.L485 Welded Pipe a rock star? Well, steel, as an alloy, possesses many mechanical properties. Its strength increases and so does its resistance to chemicals. It also acquires flexibility, sturdiness, and shine. Unlike iron, it does not corrode and enjoys a longer shelf life. The look also gets an upgrade, thereby, adding to its aesthetical value.
To get more details, Download SO 3183 GR.L485 Welded Pipe.
ISO 3183 Pipe PRODUCTS
Why purchase ISO 3183 GR.L485 Welded Pipe from Rexal Tubes?
Rexal Tubes boasts of a long and impressive journey in the field of ISO 3183 GR.L485 Welded Pipe production. The company has been manufacturing and supplying ISO 3183 GR.L485 Welded Pipe for fifteen years to consumers spread across the globe. The national and international customers have reposed their faith time and again in the company as the products have lived up to their piping requirements. They have served different purposes like transmission of oil and gas, water treatment, drilling, structural equipment, etc. All this has been made possible because of the first-rate quality of ISO 3183 GR.L485 Welded Pipe that are manufactured with the best machines and methods.
At Rexal Tubes, the most up-to-date manufacturing procedure is followed in an equally modern factory with the help of cutting-edge tools that always lead to fine quality modern ISO 3183 GR.L485 Welded Pipe. The technicians follow the quality control measures strictly and the production procedures are always in tune with the latest grading of international and national bodies. Last but not the least, there is full scope for customization and the customer can always rely on the after sale services for their unique pipe/tube requirements. Rexal Tubes supplies pipes in different shapes, sizes, lengths, widths, diameters, thickness, grades, designs and numerous other specifications. The choices are endless and completely equipped to cater to the diverse demands.
We are the biggest suppliers of ISO 3183 GR.L485 Welded Pipe in Singapore, Malaysia, Oman, Kuwait and Vietnam.
ISO 3183 GR.L485 Welded Pipe Applications
ISO 3183 GR.L485 Welded Pipe are used in multiple fields and they include heat exchangers, fertilizers, power, paper, pulp, pharmaceuticals, sugar, food processing, dairy and many more. However, they are primarily used in transportation of petroleum, natural gas and water. All these industries put the ISO 3183 GR.L485 Welded Pipe to various uses and they serve different purposes in accordance with the operations requirement. The ISO 3183 GR.L485 Welded Pipe are fit for bending, fusion welding and flanging. They are totally customizable and this is why, the ISO 3183 GR.L485 Welded Pipe come with such a wide scope of application. Strong and durable, the ISO 3183 GR.L485 Welded Pipe are applied in high-pressure work conditions and it is their quality through which they stand the high temperature and pressure, fulfilling the operational demands of the businesses. The ISO 3183 GR.L485 Welded Pipe are designed to deliver and are already tested for performance. So, no matter what the industrial application, one can rest assured that the pipes will perform to perfection and give the results that they are expected to give.
ISO 3183 GR.L485 Welded Pipe Grade,Chemical Composition and Mechanical Requirements
Grade:ISO 3183 GR.L485 Welded Pipe L 245 or B
-
X
- The x symbol followed by a two or three digit number equal to the specified minimum yields strength in 1000 psi rounded down to the nearest integer.
-
Minimum Yield
- At pipe body 245 MPa (35,500 psi)
-
Delivery Condition
- +N Normalizing rollingQ Quenched and tempered
where +Q refers to a heat treatment
process consisting of quench
hardening followed by tempering
-
PSL
- PSL refers to product specification level,
where PSL 1 mentions the minimum mechancial requirement
Applicable codes and standards API 5L, 45th Edition / ISO 3183 Specification for line pipe – technical delivery conditions.
Size: 16” to 64”
Wall Thickness: 6 MM to 65MM
Length: up to 18 Meters
Mention the following as *Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.
CHEMICAL COMPOSITION | ||||||||||
C | Si | MN | P | S | V | Nb | Ti | Other | Carbon Equivalent | |
Max (b) | Max | Max (b) | Max | Max | Max | Max | Max | % maximum | ||
CE(IIW) | CE(Pcm) | |||||||||
0.26 | – | 1.20 | 0.030 | 0.030 | (c),(d) | (c),(d) | (d) | (a) | – | – |
MECHANICAL REQUIREMENT | ||||||||
Tensile Requirements on Pipe body of welded pipes | Ratio | Elongation | CVN Absorbed Energy | Heat Treatment | ||||
Yield Strength (R10.5) | Tensile Strength (R) | R 10.5/ R | % | 0 degree celsius | ||||
PSI | Mpa | PSI | Mpa | Max | Minimum | Min J | Min ft. lb | Wield Seam Normalizing |
35,500 min | 245 min | 60,200 min | 415 min | – | – | – | ||
IMPACT TEST |
|
AVG ABSORBED ENERGY | IND. ABSORBED ENERGY |
MIN (JOULES) | MIN (JOULES) |
27 | 20 |
Notes:
- 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum. For grades up to and including X52, Cu, Cr and Ni shall not be added intentionally.
- For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese in permissible, up to a maximum of 1.65% for grades ≥ B, but ≤ X52; up to a maximum of 1.75% for grades > X52, but
- Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
- The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
- Unless otherwise agreed.
- Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15
- Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
- The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
- Unless otherwise agreed.
- Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
Other details
Surface
- All surfaces have been 100% visually inspected. The surface condition complies with API 5L standards.
- External surface of pipe shall be coated with a layer of varnish.
NDT
All pipes will be ultrasonic tested on pipe body and pipe end as per API 5L standards:
- longitudinal: 100% of the pipe surface
- pipe ends not scanned by automatic ultrasonic system shall be inspected by manual UT or Magnetic Particle Examination.
Certification and traceability
All dimensions will be supplied with a 3.2 certificate according to EN 10204, endorsed by recognized and independent inspection agency. Marking shall be in SI units (B) accordance with API requirements & mill standard.
Dimensional control
All dimensions will be supplied according to API 5L clause 9.11; In addition, the following tolerances apply:
- Pipe body: +/- 0,75%
- Pipe end: +/- 0,5%
- Wall thickness: +15%, -12,5%
- Length: -0 / +100mm
Pipe Ends
Pipe Ends are beveled. End angle shall be 30°- 0°/+5°, root face shall be 1.6mm +/- 0.8mm and fitted with bevel protectors.
Protection
Pipes are varnished on the outside.
Related Products
API 5L is the specification for line pipe. Rexal Tubes offers both seamless and welded API 5L Pipe.
Know more
Carbon Steel Seamless Pipes are widely acclaimed for their features such as high tensile strength, smooth internal finish and hardness.
Know moreAlloy Steel Pipes
Rexal Tubes has been manufacturing and supplying alloy steel pipes of various forms to various industries and these include not just the ones that have been mentioned above.
Know more
Stainless Steel Pipes are one of the most commonly used products and they have grown in importance because of their amazing qualities.
Know moreFlanges are used in pipes when joints need to be dismantled, inspected or adjusted. It is used so that the pipes can be disassembled
Know moreOur Products
Contact Us
Address
Shreepati Castle, Wing – D, 1st Floor, Office No. 5, 11th Khetwadi Back Road, Mumbai – 400 004.
Contact
sales@rexaltubes.in / info@rexaltubes.in
+91-22-66518638
+91-22-66633399
91-22-66151483