API 5L X42 PSL2 DSAW Pipe Supplier
Rexal Tubes is the leading manufacturer and supplier of API 5L X42 PSL2 DSAW Pipe as well as other types of API 5L pipes. We have been offering pipes and tubes to national and international customers for fifteen years across industries. Our stocks carry a diverse set of alloy steel, stainless steel and carbon steel pipes in different dimensions. We have welded, seamless, PSL1 and PSL2 pipes and all these pipes are manufactured with due diligence and quality is given foremost priority at every stage of manufacturing because we know how important it is for the various industries.
“Quality Assurance” is the guiding philosophy at Rexal Tubes and this is why we do not just conform to the rule book of API. We also follow the quality guidelines of other regulatory institutes and we have validation from national labs as well. Our testing standards are strict and we follow them with equal strictness. Our technicians are well-versed in technology and the equipment that we use are also in tune with the latest developments. So, when one buys from Rexal Tubes, one can be sure of finding the best and the most suitable API 5L X42 PSL2 DSAW Pipe at the most reasonable prices.
API 5L X42 PSL2 DSAW Pipe are the most significant operational tool in petroleum, natural gas, oil and other industries that deal with the transmission of liquid and gases in their business. Such businesses invest a lot in the pipes/tubes and always look for best quality pipes. The strength of the pipes is a matter of great concern for these businesses and therefore, they look up to API 5L X42 PSL2 DSAW Pipe for these pipes come with the hallmark of credibility and competence. These pipes adhere to the guidelines of the American Petroleum Institute (API) that has set down some benchmarks for the physical, chemical properties and manufacturing process of pipes. These guidelines were devised to ensure safe transmission of oil, gas, and liquid and they have proved their worth across industries.
The manufacturing process of API pipes is quite detailed and when it comes to API 5L X42 PSL2 DSAW Pipe i.e. double submerged arc welded pipes, this process follows certain steps. In the welding process, the welding arc is submerged in flux during the welding. Both inside and outside welds are needed in this process and finished in separate processes. Also, these pipes are manufactured using two methods, the pyramid roll method, and the U-O-E method. The double submersion of the pipes gives them greater strength and resistance rendering them fit for a wide range of purposes and Rexal Tubes brings forth a wide set of API 5L X42 PSL2 DSAW Pipe to power the industrial operations.
We are the biggest suppliers of API 5L X42 PSL2 DSAW Pipe in Singapore, Malaysia, Oman, Kuwait and Vietnam.
API 5L X42 PSL2 DSAW Pipe Applications
API 5L X42 PSL2 DSAW Pipe are thickly walled and possess high resistance to temperature and pressure which makes them fit for petroleum, natural gas, and petrochemical industries. These are the industries that are heavily into pipes usage but others also use pipes for their operations and they include power plants, shipbuilding, piling, mechanical processing, construction, thermoelectricity, refineries, drilling, breweries, pharmaceuticals, etc. The scope of commercial applications is quite huge and these pipes have the stamina and sustainability to accomplish the different tasks.
With API 5L X42 PSL2 DSAW Pipe to power the transmission operations, one does not have to worry about adverse environmental conditions and tough terrain. These pipes possess the right amount of strength to get the work done. What is more, along with the diverse range, there is also the provision for customization services which make the pipes even more effective. So, if one is looking for high-quality, standards and strong pipes then Rexal Tubes is the place to come.
API 5L X42 PSL2 DSAW Pipe SPECIFICATION
Applicable codes and standards API 5L, 45th Edition / ISO 3183 Specification for line pipe – technical delivery conditions.
Size: 18” to 120”
Wall Thickness: 5 MM TO 27 MM
Length: up to 18 Meters
*Additional testing requirements met*: NACE MR
0175,NACE TM0177,NACE TM0284,HIC TEST, SSC TEST, H2 SERVICE,IBR, ECT in all
the products.
| CHEMICAL COMPOSITION | ||||||||||
| C | Si | MN | P | S | V | Nb | Ti | Other | Carbon Equivalent | |
| Max (b) | Max | Max (b) | Max | Max | Max | Max | Max | % maximum | ||
| CE(IIW) | CE(Pcm) | |||||||||
| 0.26 | – | 1.40 | 0.030 | 0.030 | (d) | (d) | (d) | (a) | – | – |
| MECHANICAL REQUIREMENT | ||||||||
| Tensile Requirements on Pipe body of welded pipes | Ratio | Elongation | CVN Absorbed Energy | Heat Treatment | ||||
| Yield Strength (R10.5) | Tensile Strength (R) | R 10.5/ R | % | 0 degree celsius | ||||
| PSI | Mpa | PSI | Mpa | Max | Minimum | Min J | Min ft. lb | Wield Seam Normalizing |
| 46,400 min | 320 min | 63,100 min | 435 min | – | – | – | ||
| IMPACT TEST | |
| AVG ABSORBED ENERGY | IND. ABSORBED ENERGY |
| MIN (JOULES) | MIN (JOULES) |
| 27 | 20 |
Notes:
- 0.50% maximum for copper; 0.50% maximum for nickel; 0.50% maximum for chromium and 0.15% maximum for molybdenum. For grades up to and including X52, Cu, Cr, and Ni shall not be added intentionally.
- For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese in permissible, up to a maximum of 1.65% for grades ≥ B, but ≤ X52; up to a maximum of 1.75% for grades > X52, but
- Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
- The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
- Unless otherwise agreed.
- Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15
- Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%.
- The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
- Unless otherwise agreed.
- Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%
Other details
Surface
- All surfaces have been 100% visually inspected. The surface condition complies with API 5L standards.
- External surface of pipe shall be coated with a layer of varnish.
NDT
All pipes will be ultrasonic tested on pipe body and pipe end as per API 5L standards:
- longitudinal: 100% of the pipe surface
- pipe ends not scanned by automatic ultrasonic system shall be inspected by manual UT or Magnetic Particle Examination.
Certification and traceability
All dimensions will be supplied with a 3.2 certificate according to EN 10204, endorsed by recognized and independent inspection agency. Marking shall be in SI units (X42) accordance with API requirements & mill standard.
Dimensional control
All dimensions will be supplied according to API 5L clause 9.11; In addition, the following tolerances apply:
- Pipe body: +/- 0,75%
- Pipe end: +/- 0,5%
- Wall thickness: +15%, -12,5%
- Length: -0 / +100mm
Pipe Ends
Pipe Ends are bevelled. End angle shall be 30°- 0°/+5°, root face shall be 1.6mm +/- 0.8mm and fitted with bevel protectors.
Protection
Pipes are varnished on the outside.
We have a wide variety of API5L PSL1 DSAW Pipe in our inventory. Rexal Tubes ensure that inventory is up-to-date and is abundantly available according to the customer demands. We have various grades of Api5l pipe available right from API 5L X 42 PSL 1, API 5L X 46 PSL1 DSAW, API 5L X52 PSL1 DSAW, API 5L X56 PSL1 DSAW, API 5l X 60 PSL1 DSAW, API 5L X 65 PSL1 DSAW, API 5L X 70 PSL1 DSAW, API 5L X 80 PSL1 DSAW. Our API 5L X42 PSL1 DSAW PIPE are most preferred due to its high-strength and superior quality. We prioritize customer satisfaction through our efficient pipes and services. Thus, we are one of the dominant API 5L X42 PSL1 DSAW PIPE Suppliers.
Packaging and Marking
Being the superior API 5L X42 PSL2 DSAW Pipe Manufacturers and Suppliers, precisely pack and transport the pipes. To protect the pipes from deterioration and damage from the external environment, we systematically follow safety procedures and standards. We at Rexal Tubes, understand the importance of marking for identification. Our team precisely marks the address and other essential information to ensure delivery at the right place and right time. None of the API 5L X42 PSL2 DSAW Pipe is found to be damaged on delivery. In addition, necessary information about the pipes such as size, material etc. is provided during delivery.
Pricing Table
| DESCRIPTION | GRADE | SIZE | SCH | BRAND | PRICE PER TON IN USD |
|---|---|---|---|---|---|
| Carbon steel SMLS Pipe | A106, A333, X42, | 1/2″ To 24″ | 10, 20, 30, STD, 40, 60, XS, 80, 100, 120, 140, 160, XXS | V&M Germany, Vallourac Brazil, Tenaris Italy, NSSMC JAPAN, MSL INDIA, ISMT INDIA | 1200 TO 1400 |
| Carbon steel SMLS Pipe | X52, X56, X60, X65, X70 | 1/2″ To 24″ | 10, 20, 30, STD, 40, 60, XS, 80, 100, 120, 140, 160, XXS | V&M Germany, Vallourac Brazil, Tenaris Italy, NSSMC JAPAN, MSL INDIA, ISMT INDIA | 1400 TO 2000 |
| Carbon steel ERW, LSAW, SAW, EFW Pipe | API 5L GR.B, X42, | 16″ To 84″ | 10, 20, 30, STD, 40, 60, XS, 80, 100, 120, 140, 160, XXS | NSSMC JAPAN, JFE JAPAN, MSL INDIA, WELDPUN INDIA, ARCELOR MITTAL | 800 TO 1000 |
| Carbon steel ERW, LSAW, SAW, EFW Pipe | X52, X56, X60, X65, X70, A671 & A672 | 16″ To 84″ | 10, 20, 30, STD, 40, 60, XS, 80, 100, 120, 140, 160, XXS | NSSMC JAPAN, JFE JAPAN, MSL INDIA, WELDPUN INDIA, ARCELOR MITTAL | 1000 TO 1300 |
| ALLOY STEEL TUBE | A213 T11, T12, T5, T9, T22, T91 | 12.7 MM TO 168.3 | 2MM TO 20MM | NSSMC JAPAN, ISMT INDIA, V&M FRANCE | 4200 TO 4600 |
| ALLOY STEEL PIPE | A335 P5, P9, P11, P12, P22, P91, A691 | 1/2″ TO 24″ SMLS & 16″ TO 48″ ERW | 10, 20, 30, STD, 40, 60, XS, 80, 100, 120, 140, 160, XXS | NSSMC JAPAN, ISMT INDIA, V&M FRANCE, TENARIS ITALY | 3000 TO 5000 |
| STAINLESS STEEL SMLS PIPE | A312 TP304, 304L, 316, 316L, 321, 347, 310 | 1/2″ To 16″ | 10, 20, 30, STD, 40, 60, XS, 80, 100, 120, 140, 160, XXS | NSSMC JAPAN / TUBACEX SPAIN / SURAJ GROUP / RATNAMANI | 3800 TO 5000 |
| STAINLESS STEEL ERW PIPE | A312 TP304, 304L, 316, 316L, 321, 347, 310 | 1/2″ To 48″ | 10, 20, 30, STD, 40, 60, XS, 80, 100, 120, 140, 160, XXS | NSSMC JAPAN / TUBACEX SPAIN / SURAJ GROUP / RATNAMANI | 3000 TO 4000 |
Cities We Reach
Ahmedabad, Abu Dhabi, Algiers, Ankara, Al Jubail, Atyrau, Ahvaz, Al-Khobar, Aberdeen, Bengaluru, Bangkok, Bogota, Busan, Bhopal, Brisbane, Chennai, Chandigarh, Coimbatore, Calgary, Chiyoda, Cairo, Courbevoie, Colombo, Caracas, Daman, Dallas, Dubai, Doha, Dammam, Ernakulam, Edmonton, Faridabad, Gurgaon, Geoje-si, Perth, Granada, Gimhae-si, Haryana, Houston, Hyderabad, Hanoi, Howrah, Hong Kong, Ho Chi Minh City, Indore, Istanbul, Jakarta, Jeddah, Jharkhand, Kolkata, Kuwait City, Karachi, Kuala Lumpur, Ludhiana, London, Lahore, Lagos, Los Angeles, Lucknow, La-Victoria, Mumbai, Melbourne, Madrid, Muscat, Moscow, Manama, Montreal, Mexico City, Milan, New Delhi, Navi Mumbai, Noida, New York, Pimpri-Chinchwad, Port-of-Spain, Pune, Petaling Jaya, Riyadh, Rajkot, Rio de Janeiro, Seoul, Singapore, Sharjah, Santiago, Surat, Secunderabad, Sydney, Tehran, Thiruvananthapuram, Thane, Toronto, Ulsan, Vadodara, Vung Tau, Visakhapatnam.
Countries We Reach
Australia, Afghanistan, Algeria, Angola, Argentina, Austria, Azerbaijan, Bangladesh, Brazil, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Bahrain, Costa Rica, Canada, Croatia, Czech Republic, Colombia, Chile, China, Denmark, Egypt, Ecuador, Ghana, Greece, Gabon, Hong Kong, Hungary, India, Indonesia, Israel, Iran, Italy, Iraq, Japan, Kuwait, Kazakhstan, Kenya, Libya, Lithuania, Lebanon, Morocco, Mongolia, Mexico, Mexico, Malaysia, Nigeria, Norway, Netherlands, Nigeria, New Zealand, Oman, Philippines, Poland, Pakistan, Peru, Estonia, France, Finland, Poland, Portugal, Qatar, Romania, Russia, Spain, Serbia, Singapore, Sri Lanka, South Africa, South Korea, Switzerland, 聽Sweden, Slovakia, Saudi Arabia, Taiwan, Turkey, Thailand, Trinidad & Tobago, Tunisia, United States, Ukraine, United Arab Emirates, United Kingdom, Venezuela, Vietnam, Yemen.
FAQ
What are the uses of API 5L X42 PSL1 Pipe?
The American Petroleum Institute specification API 5L X42 PSL1 Pipe is mostly used for the transportation of natural gas, water, oil and petroleum from one point to another. API 5L pipes are both seamless and welded.
What is the difference between seamless and welded pipe?
Seamless pipe is manufactured using round steel billet as a raw material, through hot/cold rolling, or cold drawn processes. There is no seam on the pipe body. Whereas, the welded pipe is manufactured using a hot-rolled coil as raw material and bending a flat steel plate into circular or
other shapes.
Which are the various grades in API5l Pipe?
API5l X42, API5l X46,API5l X52,API5l X56, API5l X60,API5l X65,API5l X70,API5l X80 are the various grades in API5l Pipe
Which are the various standards in API5l pipe?
There is PSL1 and PSL 2 standards in API Pipe
